|
Post by dragsterdick on Oct 2, 2018 2:40:35 GMT
Has anyone replaced it with a solid piece and eliminated the original steering column rag joint ?
|
|
|
Post by rumblefish on Oct 2, 2018 12:37:15 GMT
Dick, Yes I have, S.S. U- joint , welded on one side, Spline w/ set screw on the other end for removal. The end with the set screw needs a hole drilled thru the socket and shaft so you can install a roll pin ( Per NHRA ). I can send you a picture this weekend. Jay
|
|
|
Post by rumblefish on Oct 3, 2018 13:44:57 GMT
Need to correct, Both ends are splined with set screws and Drilled thru the shafts with additional Roll Pins. The U-Joints are available thru either Summitt or Jegs.
|
|